top of page

Grupo

Público·11 miembros

Prolific Usb-serial Comm Port Driver 1.0 Download High Quality


The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with CP210x products. These devices can also interface to a host using the direct access driver.




Prolific Usb-serial Comm Port Driver 1.0 Download


Download Zip: https://www.google.com/url?q=https%3A%2F%2Furlcod.com%2F2u4Zra&sa=D&sntz=1&usg=AOvVaw2Juy7Ms_tVgK45hSParRR6



The CP210x Manufacturing DLL and Runtime DLL have been updated and must be used with v 6.0 and later of the CP210x Windows VCP Driver. Application Note Software downloads affected are AN144SW.zip, AN205SW.zip and AN223SW.zip. If you are using a 5.x driver and need support you can download Legacy OS Software.


Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the This page contains the VCP drivers currently available for FTDI devices.


Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the same way as it would access a standard COM port.


I have a few handheld radios that I need to update the frequencies and when I connect to the USB, it fails to connect. In device manager and Ports it says - "Please install corresponding PL2303 driver to support Windows 11 and further OS"


There is a working driver at _id=225&pcid=41, a bit down the page listed as "DCHU (for PC Vendors)". Getting it installed is a bit tricky, it seems. What I did is this:First install the downloaded driver by unpacking the zip file and "pnputil /add-driver *.inf /subdirs /install" (the /install is probably not necessary) from the extracted "Win11_DCHU" directory. It will add the two driver packages to the driver store and tell you what oemXY.inf files it has assigned to them.Then "pnputil /enum-drivers", and in the output look for Prolific drivers other than the ones from the previous step. I had only one other entry, a "ser2pl.inf" version "09/16/2021 3.8.40.0".Disconnect the device, and "pnputil /delete-driver oemXY.inf" with the INF file you located in the previous step.Connect the device again, and it should work, at least, it does for me. The problem is probably that the non-working driver is the newest (September 2021 vs. July for the ones from the download page) and so Windows prefers it over them.


Windows 11 update loaded Prolific PL2303 driver 3.8.40.0 and when I go to device manager it says "Please install corresponding PL2303 driver to support Windows 11 and further OS" This driver does not even attempt to communicate with my X10 CM11 hooked to my serial port. I had to go to Prolific website and load their current driver 3.6.81.357. (uninstall driver first) Serial to X10 device now working fine. Don't install Windows update for Prolific or it will change it back.


Updating your drivers often work wonders for your system because it makes sure that it runs on the latest features that guarantee maximum functionality. Unfortunately updating your drivers can cause this kind of error especially if your latest update does not work too well with your hardware. Once you upgrade your PC to the latest Windows version your Prolific USB to Serial Driver also updates to the latest driver software and if the driver is not compatible with your Hardware issues may arise. To correct the error, you will have to download the driver again by following these steps.


A code 10 error may arise because the chip you are using is not an original one. If you are using a fake, the manufacturer has a way of disabling it due to copy write infringement and the copy write takes effect once you download a recent update. To protect your PC from getting this code, you will have to make sure that your Windows 11/10 never updates a driver without approval. Updates come in the form of 64 bit and 32-bit drivers. Below we will show you how to work your way around the problem.


Technical support for Windows 98/ME/2000/XP driver stopped here. Windows 8/8.1/Server2012/Server2012R2 and Windows 10 are NOT supported with the PL2303HXA/XA chips. Mainly as these chips are no longer in production and had reached it end of life. Again check what chipset you are trying to get to work.


You will also note that the Prolific USB-to-Serial Comm Port drivers was used on the LENOVO ThinkPad T60 version 1951A24. There was also a ASUS com port card (ASUS BM1845 COM Port Card) as well as extensively used by HP with its HP USB to Serial Port Adapter.


The Prolific VID_067B&PID_2303 (PL2303 series) was the series of chipsets used. The chipsets was used on thier HP 280 G8 Microtower PC, HP 280 Pro G8 Microtower , HP 288 Pro G8 Microtower as well as the HP 290 G8 Microtower . You will note the Prolific USB to serial driver Windows 10 download below. This is the latest version. This is also a Prolific USB to serial driver Windows 10 64-bit driver. Its 32bit as well as 64bit.


The December 2021 driver which is the latest driver does not support PL-2303X or XA, PL-2303HX (Rev A) or PL-2303H. These chipsets have been dropped for any support for Windows 8 or above. See the 2015 driver above which will still work for the older hardware. These will now give you are error 10 on the pl2303 driver.


These are the most common issues with the Prolific. People dont read the latest driver inserts. These will tell you which chipsets are no longer supported. You will then need to roll back to solve the issues. So hopefully you have found your driver. Solved the error 10 problem with the latest Prolific drivers and have learned something new.


The prolific usb to serial is very prolific (literally) devices that you find in many other equipment. There are drivers on this website for other drivers with issues. Use the search bar on the side to find the others if you dont have a pl2303 device but a different chipset series. There are a few on this website alone. Download the latest driver below. If it fails on your device. Come back and download the older version in the middle of this page, the 2015 one. Till I see you then ? See also the Prolific USB to Serial Comm Port as well as the Prolific USB to Serial Comm Port Driver.


Realtek High Definition Audio Driver Windows 11 DownloadAre you suffering from Windows 11 audio driver not working problem? Do you know where to download a new sound driver and fix the issue? The answer is here!


  • Please contacttech-support@actisys.com for the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number that is not "UN" or "LI". In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 above for providing your basic data) For Windows 7/8/10 OS, Dvr installer v1.12.0 and Install Guide for ACT-IRx24UN-Lx and IRx24UN-Lx-LE (Compatible Driver & TSPackfor those IR adapters which their SN# prefix starts with "TA").Please contacttech-support@actisys.com for the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 above for providing your basic data) IRx24UN-Lx_Lx-LE-Manual-v1.3.4-140324.pdf General Manual -ACT-IRx24UN-Li/IRx24UN-L+/ IRx24UN-LN and ACT-IRx24UN-Lx-LE Advanced-Uninstaller-121127.zip_File Size=18279KB This is a Driver Removerfor those users who could not uninstall the old driver from PCsuccessfully. After running this software and complete un-installation isdone, please reboot your PC. Then install the new driver. ( Source: AdvanceUninstaller PRO by Innovative Solutions.) For Mac OS X 10.11 El Capitan (64-bit)

  • For Mac OS X 10.10 Yosemite (64-bit)

  • For Mac OS X 10.9 Mavericks (64-bit)

  • For PL2303 H/HX/HXD/EA/RA/SA/TA/TB chip versions

  • For Prolific USB VID_067B&PID_2303 Only

  • Includes Driver Installation Manual

  • Please contacttech-support@actisys.com for the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 above for providing your basic data) md_IRx24UN_H_HX_X_dmg_v1.2.1r2.zip ACT-IR224UN/424UN Mac OS X Universal Binary Driver (DMG file format) For MacOS 10.1 and above for PowerPC based Mac For MacOS 10.4 and above for PowerPC and Intel based Mac Supports Mac OS X 10.5 and above for PowerPC and Intel based Mac md_IRx24UN_Mac8_9_v136b1.zip ACT-IR224UN/424UN Mac OS 8 & 9 driver v1.3.6 build 1 ACT-IR224UN-Li-4Mac-Manual-v1.3.4-140324.pdf Manual - for Mac Usersof ACT-IR224UN-Li Generic_IRx24UN_WinCE50_ARM_v1009.CAB ACT-IR224UN/424UN WinCE 5.0Driver for ARMStandard SDKAlso for Windows Mobile 6, Windows Mobile5, PocketPC 2003.NOTE: Check \HKEY_LOCAL_MACHINE\Drivers\Active\USBSER folder in registry forthe COM port number. Generic_IRx24UN_WinCE50_x86_v1009.CAB ACT-IR224UN/424UN WinCE 5.0Driver for x86Standard SDKAlso for Windows Mobile 6, Windows Mobile5, PocketPC 2003.NOTE: Check \HKEY_LOCAL_MACHINE\Drivers\Active\USBSER folder in registry forthe COM port number. ld_IRx24UN_Linux_v0728.rar ACT-IR224UN/424UN Linux driver for RedHat 7.3/8.0/9.0Only.NOTE: No need to install drivers for following:Linux Kernel 2.4.10 and above already includes built-in drivers forPL-2303H.Linux Kernel 2.4.31 and above already includes built-in drivers forPL-2303H, PL-2303XA/HXA and PL-2303HXD ACT-IR224UN/IR424UN Configuration utilityPlease contacttech-support@actisys.com for it (Please See NOTE3 for providing your basic data) ACT1-201; ACT1-211 ACT1-201 Driver DriverInstaller Pleasejust download from IR224UN. Actually they sharethe same driver. ACT1-211 GPS Driver ACT1-211_1414_20110314_GPS.zip GPS Driver to block Windows Mouse problem occur at2400 bps (supports Win7 32 and 64 bit) ACT-IR100UD-MDT ACT-IR100UD-MDT-CD-v1.1.0-130208.zip CD forIR100UD-MDT which includes Windows driver. Please download otherdrivers from above IRx24UN just in case needed. Theyactually share the same. ACT-IR2000UL/IR4000US User's Manual for Windows XP/Vista/Win7/8/10 Please contacttech-support@actisys.com (Please See NOTE3 above for providing your basic data) Driver for Windows 98/Me/2000/XP/vista/Win7/8/10 (32 & 64 bit) Please contacttech-support@actisys.com for the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 above for providing your basic data) ACT-IR2002UL/IR4002US IR2002UL/IR4002US Manual Please contacttech-support@actisys.com (Please See NOTE3 above for providing your basic data) IR2002UL /IR4002US Drivers Please contacttech-support@actisys.comfor the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 abovefor providing your basic data) ACT-IR2012UL IR2012UL Manual Please contacttech-support@actisys.com (Please See NOTE3 above for providing your basic data) IR2012UL Drivers Please contacttech-support@actisys.comfor the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 abovefor providing your basic data) Note: If you use IrDA-OBEX, theseUSB-IrDA adapters support Win7/8/10-32 and 64 bit. But, if you use IrDA-IrComm,you'll need IrComm2K ( free softwarefrom 3rd party) for all Windows O.S., including Win7/8-32 bit. However,IrComm2K doesNot support 64bit.then please useACT-IR100UD/ACT-IR100UD-v2/IR100UD-v3, the IntelligentUSB-IrDA adapter which is our once-for-all solution. ACT-IR100UD/ IR120UD/ IR100UD-v2/ IR100UD-v3 ACT-IR100UD/ IR120UD/ IR100UD-v2/ IR100UD-v3 Drivers & Manuals Please contacttech-support@actisys.com for the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 abovefor providing your basic data) ACT-IR100UD-LPT CD forIR100UD-LPTPlease contacttech-support@actisys.com (Please See NOTE3 abovefor providing your basic data) ACT-IR100M/ IR100MP/IR100MU ACT-IR100Mx Series (100M/100MP/100MU) User Manual ACT-IR100MxManual -v3.2.2.1-080324.pdf Manual for ACT-IR100M/IR100MP ACT-IR100MU-Manual-v1.2-100108.pdf Manual for ACT-IR100MU IR82x0D/IR8250P/IR826xDACT-IR82x0D , IR8250P & IR826xD Spec ACT-IR82x0D-Spec-v0.4.1.1-080529_fw-v1.82.pdf Specfor ACT-IR82x0D ACT-IR82x0D-Technical-v0.4.1.2-090226_fw-v1.82.pdf Technical Spec for ACT-IR82x0D ACT-IR8250P-Spec-v0.5-070117.pdf Specof ACT-IR8250P ACT-IR8250P-Technical-v0.4.5.1-080331.pdf Technical Spec for ACT-IR8250P ACT-IR826xD-Technical-v1.0.0.1-120220.pdf Technical Spec for ACT-IR826xD ACT-IR3200M ACT-IR3200M User Guide Please contact tech-support@actisys.com (Please SeeNOTE3 above for providing your basic data) ACT-IR200L/IR220L/IR220L+ Windows 7/8/10 Driver Please contact tech-support@actisys.com for the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please SeeNOTE3 above for providing your basic data) It isfor Windows 7/8/10 IrDA driver. Windows User Manual - for IrDA use IR200L-IR220L&IR220L+Manual.pdf Driver install/uninstall procedure forWindows 98/2000/XP/Vista/Win7/8/10 (32 & 64 bit) ACTiLinkACPI_011L.zip NOTE: a. You Need Not install ACTiLinkACPIfor your PC UNLESS it is really needed undersome Notebook PC forIR220L+ due to below reasons.NOTE: b. The file we provide here is ONLY a 30-day TRIALVersion. Please BUY the Standard Version ifyou feel it DOES Help, after the trial period expired.

  • [What is ACPI]: In Win98SE and later Windows O.S.,ACPI manager is used to save powerfor notebook PC. e.g., if no software using floating calculation, ACPI manager may turn off CPU. Itthen saves power.

  • [Whatit helps]: ACPI manager alsodisables COM port.ACT-IR220L+ uses no external power, which gets from RS232 COM port RTS/DTRsignal lines. This is to Deactivate this function, so thatIR220L+ can get power and function well.

  • Windows OS relevance : ACTiLinkACPI willnot work on all OLD Windows O.S., e.g. Windows 95.

ACT-IR200L ACT-IR200L-UsefulLink-v1.0.0-101013.pdf Useful Third Party Driver/SoftwareDeveloper URL Link for ACT-IR200L Windows 3.11 Driver Irwin311.zip Irwin311.exe - Windows 3.11 Driver for IR200L/220L/220L+ Only Windows 95 Driver Irda20.zip Irda20.zip - Windows 95 Driver for IR200L/220L/220L+ Only IrCOMM IrComm for Windows 2000/XP/Vista/Win 7 IrComm2K.zip IrComm - to Create Virtual Port Manual-VirtualCOMport-IrCOMM2Kdriver.pdf MicrosoftWindows 2K/XP/Vista/Win7 IrDA stack does not include IrCOMM. So, if youropposite IrDA device supports IrCOMM as a upper IrDA application protocoland wish your device exchange data using IrCOMM protocol then you candownload this Third party driver and install it. Please, refer Manual forinstallation ACT-IR204UN CD Pack for ACT-IR204UN ACT-IR204UN installation CD[Note]: Only supports up to Windows XP.(for Windows Vista/7/8/10 and up,IR224UN is its replacement.(2ndgeneration)Please contacttech-support@actisys.com (Please See NOTE3 above for providing your basic data) BLUETOOTHDongles: ACT-BT5100US-Air BT5100US-Air.zip Driver Installation CD: IVT BlueSoleil (TM) 1.6.1.1 & usermanual ACT-BT5701S v2 ACT-BT5701Sv2-Manual-v2.1.1-101223.zip User's manual ACT-BT5711U ACT-BT5711U-Manual-v1.0.3.1-140529.zip User's manual ACT-BT5800UB & BT5900US Note-Printer_PortSetting.pdf A common Note on Printer PortSetup OTHER OLD Dongles Solutions: Please Goto DownLoads O Other old dongles solutions [ Home Page About ACTiSYS Contact us IrDA Products Tutorials IrDA Test Center Compatibility [ Order Price Quote Technical Support Downloads Track a Package Jobs Feedback Privacy Terms ]


Acerca de

¡Bienvenido al grupo! Puedes conectarte con otros miembros, ...
bottom of page